Kirbert lol

I need a little help and am sorry if this has been asked before, but with AQ being here 20+ years give or take it’s bound to happen!
So I use wintergreen on pink with a toner b&w printer. But it seems to take forever for the image to be ready to carve, and if I do too soon the image will smudge under the gouge. Any suggestions, tips, or tricks? I know some have used a staz-on inkpad to seal images, but remember that being used with pencil transfers and not too sure chemical on chemical before cured is gonna help me in the right direction!

I'm one of the staz-on over wintergreen transfer people, and it works fine. I use the staz-on a few minutes after I transfer the image, stamp off the excess, and can start carving within an hour or so. Haven't had any smearing with this method.

I did a search for "speedball #1" on ebay several years ago and bought a 20-pack. Maybe I'm used to dull blades, but I can carve dozens of stamps from each blade and even when I was at my most active I'd get months out of each one. Now I'm not sure I've changed the blade in almost two years.

Yes we have. Always fun too.

I know that I've made a few of my ltcs that were "true" to size, however, if you took them out of the sleeve, you might discover that they unfolded into a larger multi sided card. Usually with more stamps. Some of my cards had pices that slid out with more stamps. Even some of my coins had more than meet the eye.

Same!!👍😊

Essentially my experience. I have never used wintergreen oil because I can get acetone much cheaper and, honestly, I don't see how anything could transfer cleaner. After transferring, I blot it with Staz-on (Sunflower, I think) and gently blot that with a dry paper towel and then it's good to go. I usually have no wait time between these steps and I don't have a problem with smearing the image.

I used to use acetone and LOVED it! But when I moved I just haven't been able to find a printer or copier that transfers for the life of me. I haven't tried in a while, I think I will again.
Thanks!

Thanks, Wise. I'll try that if I can find a good shade that I can still see thru. What color do you use?

My favorite color for contrast in an ancient orange pad that has very little ink left. I usually let my wintergreen transfers sit overnight, then give them a dab of orange, smear it around with my fingertip - gently - and cut. I like the orange because it is not only different than the carving material, it is a contrast to it. I carve on the thick Japanese beige from Stampeaz, which is sort of yellow, so yellow ink didn't show.

I use acetone. I go to one of those UPS mailing/return packages places. They use a xerox machine that uses toner. I print out copies on my printer and take them there to get copied. A local library has an old xerox toner machine that charges 10 cents a copy.

Totally agree. I get the acetone that comes in cans at the hardware store. One can lasts a very long time and the image transfer is always outstanding.

I'm not Wise, but I use this.
ETA: on pink stuff


Yup, Home Depot.

I've been using sunflower. It might depend on what material you're carving on - transfer shows up best on white firmkut, but on the tanZ there's slightly less contrast. Still can see it well enough, though. Not sure how it looks on pink stuff, if that's what you use.

Yes, they are great and less than a mile from me. So I can do pickup and save on shipping 👍🏻

I'm sorry, I am not visualizing what you do.

Can you give a step by step for me?

Thanks

I lightly sand the surface and wash it with warm water and soap. Using a few drops of wintergreen oil, I wipe the surface, place the image face down, wipe the back with a few more drops of wintergreen oil, and press down firmly. After a few seconds, I peel off the paper transfer, and set the material aside for a few minutes. Then I will tap my staz-on yellow over the image and immediately press the inked side onto plain paper, sometimes twice, to remove the excess ink ("stamping off"). You'll still have a pretty solid yellow color, but lighter than if you let it dry without removing the excess. Then I let the material sit for an hour or so before I start carving, to be sure the staz-on has thoroughly dried.

Thank you.

If you could spend a 1 week vacation in West Virginia/Virginia or within a 1 day drive of either of those 2 states, where would you go? Naturally letterboxing would be the main event but that has other interesting things to do with Parks & Museums & Historical Landmarks & scenic drives, etc...

One vote for Skyline Drive in Virginia.

Oh, and you absolutely must visit Winchester, VA. It's full of historic charm, including George Washington's surveyor office, Stonewall Jackson's Headquarters Museum, and various battlefields. Great pedestrian mall with yummy restaurants. And the real reason you have to visit is the flamingos. Do a search. There's a whole flock of them at the Museum of the Shenandoah, which itself is highly worth a visit to the museum and gardens. And I'm not saying any of this because Winchester is where my mom lives. :)

I'm from WV and now live in VA so there are a million places I could recommend for parts, historical, and interesting things but for letterboxing it's a different story. WV does not have anywhere that I have found with a high concentration of letterboxes. VA is better in parts with the best being the greater DC area. There are several blue and purple diamond boxes in the greater DC area too.

I have found those flamingos! Fun search.

Oh this does sound really lovely and very promising. And you definitely had me at the Flamingos! I’ll start researching that area. Thank you for the recommendations!!!

It’s funny you would bring up the DC area because that’s bout the only area I’m really familiar within those boundaries and it’s super tempting. Especially because for a few years I proclaimed that boxing in DC was the best boxing we’ve ever done. But that was also between 10-15 years ago. Maybe I should revisit a DC L’box search? Thank you for putting on my radar.

Another seconding of the motion, I love it! Thank you.

My daughter lives in Fairfax, Virginia. I second boxing in DC, and look into Northern Va as well/ tons of letterboxes and many blue diamonds as well. If you ever get a chance to go to an event in Virginia, go! Their events are amazing!

Shelly

My wife and I - when we weren't married - went to GA via Skyline Drive. The trip was magnificent!!

Jaxx

Well….I’m hoping to attend 2 events in Virginia next month! It’s that couple of weeks in between that I’m trying to fill in because who wants to drive home for 2 weeks and turn around and drive back again?
Thank you for the recommendations, it’s definitely looking like VA & DC will keep me plenty busy!

Ooh another recommendation for the Skyline Drive! I’ve never heard of it but is definitely on my destination list now. Thank you for suggesting!