Skip to Content
Register · Login
About Theme

A Letterboxing Community

Search Edit Search

Read Board: Tools of the Trade

Re: Carving Material
Board: Tools of the Trade
Reply to: #182010 by Funhog
Feb 1, 2008 1:02pm
Thread
I, too, used MasterCarve for my sig stamp, and with well over 300 stampings it was still just fine...I know that the corners can be broken off if you push on it, but I've never seen it "crumble" and I've used it on smaller stamps too.

Though I have started to use the pink stuff now, just so I can have more detail.
But I still like the mastercarve for it's ease of carving!

Wander Woman
*the boxer formally known as HopeAB*
Re: How much $ do you put into your boxes?
Board: Tools of the Trade
Reply to: #181807 by typengrype
Feb 1, 2008 1:53pm
Thread
TOTAL: Approximately $12 per box.

Bandaids (for the fingers sliced open while carving) $0.12
Lava Soap (to get that ink off your fingers) $3.39
Extra paper (because we know you stamp it 20 times before planting) $0.43
Medical Bills (Come on....you know letterboxers are crazy. After all, you have to keep the psychiatrist paid) $80 per hour times 3 sessions per week = $160.00

I would estimate we have 2 or 3 $ in each box.


Now see thats what i'm talking about.
My boxing buddy and i were saying how inexpensive this hobby is. And now i have some facts to go with that thought. Thanx you guys

deniserows
Michaels gift can $1.00
Eraser $.59
Index cards and a post screw $1.89
Re: Freshness Keepers Coupon at OSJL!
Board: Tools of the Trade
Reply to: #182097 by Connfederate
Feb 1, 2008 1:55pm
Thread
While you're there could you pick me up some of those Pig ears? j/k

deniserows
and wonders where OSJL is located
Re: How much $ do you put into your boxes?
Board: Tools of the Trade
Reply to: #181756 by QueenMother'n'CloudWalker
Feb 1, 2008 2:13pm
Thread
Most people don't seem tobe putting ink pads in their boxes. For me that's one of the bigger expenses, since even the cats eye ink pads are over $2 each.

For logbooks I use 4x6 cards, staples, and white duct tape (which looks like a book binding). Fast and cheap.

I going to look for the lock n lock cheap knock offs at my local Job Lot store after reading a post earlier about how they stand up better than the real ones and are much cheaper. I think they were about $1 each.

stamp - $1
ink - $2.50
logbook - $0.20
container - $1 to $2

Say $5 per box. And I planning on placing 7 boxes this weekend so that's $35. Don't tell my husband! He thinks I'm insane enough as it is!
Lock & Lock AVAILABLE
Board: Tools of the Trade
Feb 1, 2008 7:48pm
Thread
First of all...
I do have the small rectangle that are so awesome and now I also have the 1.7 cup SQUARE.
the one I referred to as a #1 Square now in stock as well as a couple of sets

next...
I had hoped to have definitive answers for you on which Lock & Locks will be available and for how long...
but i seem to have even the sales reps confused...
actually they have themselves confused.
one minute something is no longer available...
keep persisting and suddenly some of the item numbers are showing up available *shrugs*
but then again... the next person will say...
we no longer have those *growling*

I do know I can still get the school set whic has the #2 square (2.5 cup) in it...
so why shouldn't I be able to get the square by itself... right?

The larger rectangle (2.3 cup flat) that many of you asked me for...
they are telling me it is never sold "wholesale" anymore only retail priced.
hummmmmm? guess that is why you guys have not been able to find it for a long while.
This bothers me... I am gonna continue to try to crack them and to get a shipment of these

I am still working on the warehouse and sales people...
when I know more I will tell ya more.
Re: Carving Material
Board: Tools of the Trade
Reply to: #181817 by McBoxer
Feb 1, 2008 8:25pm
Thread
I like Mastercarve the best. Pink stuff next.
Re: Carving Material
Board: Tools of the Trade
Reply to: #182024 by the Dawg Pound
Feb 1, 2008 8:30pm
Thread
I've never had that problem with mastecarve....are you sure you didn't have speedy carve? Now THAT stuff is trash! You can crumble it between your fingers.
Re: Carving Material
Board: Tools of the Trade
Reply to: #181817 by McBoxer
Feb 1, 2008 9:17pm
Thread
Quote I am looking, maybe, for something that a child could very easily carve,


I found a plastic eraser at a college bookstore while traveling. I wished I had bought more after creating a stamp. The ink transferred great. It was the Mercur Iraser Eraser. 69 cents. They come in bright colors and smell really good too. Kids would like that. Heck I liked it. I found them later by searching the internet, but decided to place an order for PZCUT. I do love it, but since you asked specifically for a kids' material, I thought of the eraser right off.

Flay Ming Yon
Re: Carving Material
Board: Tools of the Trade
Reply to: #181817 by McBoxer
Feb 2, 2008 2:36am
Thread
That is stange to have those issues with MasterCarve. I have never had it crumble. Mtn. Wizard
Re: Lock & Lock AVAILABLE
Board: Tools of the Trade
Reply to: #182304 by Dixie
Feb 2, 2008 3:18am
Thread
I am gonna continue to try to crack them and to get a shipment of these
glad to know that we have a tough cookie on the case!
thanks
six stars
Re: Lock & Lock AVAILABLE
Board: Tools of the Trade
Reply to: #182304 by Dixie
Feb 2, 2008 3:54am
Thread
Hey Dixie,
I have seen the 6 oz rectangle and the 15 oz rectangle . . . . but I thought somewhere once upon a time I saw an 11 oz rectangle?? I would like to get some of those, as (in my opinion) the 6 oz is a little snug and the 15 oz is a tad big. Was I dreaming?
~resQlou
Re: How much $ do you put into your boxes?
Board: Tools of the Trade
Reply to: #181797 by gollygee
Feb 2, 2008 6:20am
Thread
Quote
Lock & Lock: $3.00
Camo tape: .$.50
Baggies: $.10
Log book: $2.00
PZ Kut: $1
Prize: $10
Gas: $5.00

Checking on your box and seeing all the stamps from other places and receiving messages about how much people enjoyed it: PRICELESS!
Re: Lock & Lock AVAILABLE
Board: Tools of the Trade
Reply to: #182363 by resQlou
Feb 2, 2008 7:29am
Thread
I have never seen an 11 oz
the 6oz is the one I love so much and call the rectangle #1
the15oz is deeper and just roomier all around and I list it as #2 rectangle
I have never seen one in between
sorry...
musta been a nice dream though ;)
Re: Lock 'n' Locks at Costco
Board: Tools of the Trade
Reply to: #181881 by Bungalow Boxer
Feb 2, 2008 8:18am
Thread
Just a report about my Costco in Enfield.....

No Lock in Locks!!!! Sniff Sniff..... they had Snapware instead in unusually large sizes and nothing small enough for letterboxing. I guess it's back to Ocean State Job Lot for me......

MW
Re: Carving Material
Board: Tools of the Trade
Reply to: #181817 by McBoxer
Feb 2, 2008 8:19am
Thread
Stranded without any carving material, I have gone to (yuk) Walmart and found three packs of white vinyl erasers, labeled "high ploymer." They are very similar in consistency to Mastercarve, a tad small but for $1.47 they are a good choice. You can also pick up an Xacto knife there in the craft section. Funhog
Re: Carving Material
Board: Tools of the Trade
Reply to: #182320 by Idhunna
Feb 2, 2008 8:29am
Thread
are you sure you didn't have speedy carve? Now THAT stuff is trash!


I bet a doughnut (no cop jokes, people) that you meant to say that Speedy Cut is trash. If that is what you meant (the tan stuff by Speedball) then I agree with you whole-heartedly! Speedy Carve is the new name for the pink stuff, formerly known as Speedy Stamp, and ever and always my medium of choice.

}8>
Re: Carving Material
Board: Tools of the Trade
Reply to: #182419 by Big Ox and the Herd
Feb 2, 2008 8:54am
Thread
Yup! I meant speedy cut! Dh went out and bought me some medium recently, and that's what he got...We were both surpirsed at how yucky it was. (And he is a noxer!) So he wen tout the next day and bought me two sheets of pink stuff and a small sheet of mastercarve....what a great guy!
Re: Lock & Lock AVAILABLE
Board: Tools of the Trade
Reply to: #182304 by Dixie
Feb 2, 2008 9:10am
Thread
Quote one minute something is no longer available...
keep persisting and suddenly some of the item numbers are showing up available *shrugs*


What you're probably dealing with is a company that gears up to make one size, runs off a bunch, then shuts that assembly line down for a few months while they make other sizes. L&L makes a bunch of sizes, and they probably don't have that many production lines, they just tool one up, run a while to build up stocks, then store that tooling while they tool up to make a different size. Hence, between runs, one particular size may in fact be out of production and difficult to find until the next time they decide to tool up to make that size again.

There's probably a language issue, too. The guys at the factory have trouble explaining all this to the US reps. The most they can manage to translate is "not in production".
Re: How much $ do you put into your boxes?
Board: Tools of the Trade
Reply to: #182384 by MO UR4Me
Feb 2, 2008 9:14am
Thread
Quote Lock & Lock: $3.00
Camo tape: .$.50
Baggies: $.10
Log book: $2.00
PZ Kut: $1
Prize: $10
Gas: $5.00


You might want to add numbers for

primer (DuplicColor Adhesion Promoter)
paint
wood
foam
glue
peel-and-stick labels
packing tape
fleece
paper
printer ink
Re: How much $ do you put into your boxes?
Board: Tools of the Trade
Reply to: #182432 by Kirbert
Feb 2, 2008 10:37am
Thread
paint
wood
foam
glue
peel-and-stick labels
packing tape
fleece
paper
printer ink


See i forgot about this stuff
foam-$.69
glue-$.59
peel-and-stick labels $.00 (got them out of a dumpster)
packing tape $1.00 at the swap meet
fleece $.00 (mom's cleaning out her craft stuff)
paper $5.00 (just had to buy some)
printer ink $13.00 (ditto above)

deniserows
maybe fishing isn't more expensive than letterboxing
painting boxes
Board: Tools of the Trade
Feb 2, 2008 12:36pm
Thread
I've tried this, too---spray painting several light coats to get good coverage......but it seems to me it is not as sturdy and the camo tape.......because it seems to scratch off real easy. Especially when these boxes continually are in contact with leaves, rocks, twigs, etc....

you don't have trouble with the paint scratching off? what do you do differently?
Re: Carving Material
Board: Tools of the Trade
Reply to: #182418 by Funhog
Feb 2, 2008 1:50pm
Thread
[quote: (yuk) Walmart ]

double Yuk

[quote: white vinyl erasers, labeled "high ploymer."]

I just bought some of these. they worked really well. I actually got 3 stamps out of one.
Re: painting boxes
Board: Tools of the Trade
Reply to: #182502 by QueenMother'n'CloudWalker
Feb 2, 2008 2:07pm
Thread
We like to use the cammo tape, too. We haven't tried painting boxes but the tape is quick and easy and is very durable. We, too, think that paint would get scratched off.

7trailwanderers
Re: painting boxes
Board: Tools of the Trade
Reply to: #182502 by QueenMother'n'CloudWalker
Feb 2, 2008 4:30pm
Thread
Quote ...but it seems to me it is not as sturdy and the camo tape.......because it seems to scratch off real easy.


No matter what you do, you can always scratch through paint. The question is whether you just scratch through it or remove a big flake of it. Or worse, whether it all flakes off just sitting there.

When painting plastic, the first thing to do is go over the plastic with fine sandpaper or something abrasive to give it a satin finish instead of glossy. Then spray it with DupliColor Adhesion Promoter followed by the paint only two minutes later. Multiple coats after that accomplish little other than to attain the appearance you're looking for.

When painted in this manner, you can scratch through the paint, but it only results in a scratch. It's still a well-camo'd container.

The tape works fine for a year or two, but then it all dries up and starts peeling off. So really it's all a matter of preference because neither camo method is as durable as I'd like.
Re: painting boxes
Board: Tools of the Trade
Reply to: #182565 by Kirbert
Feb 3, 2008 7:25am
Thread
My 2 cents..........I have used both and will not use tape any more......it only last max 2 years and ...in the south is gets melty and sticky b4 it falls off the next winter!
I use a speciality paint for bonding to plastic Krylon and rustoleum both make one in diff colors....I prefer flat black textured but and dark flat color will do! I have boxes over 2 years out side now with 99.99% of the paint doing it's job ....only a few scratches NO flakes! The paint out last camo tape at least by 2 fold...here in the south! T :)
Re: Carving Material
Board: Tools of the Trade
Reply to: #182519 by Suzy Lou
Feb 3, 2008 7:37am
Thread
Quote I actually got 3 stamps out of one


RUUUUUUN! COOOOOOOTIEEEEEEEEEES!!!!
Re: painting boxes
Board: Tools of the Trade
Reply to: #182565 by Kirbert
Feb 3, 2008 7:47am
Thread
Too much work. I use two coats of Krylon Fusion.

I also affix box identification to the inside of the container and mask the areas where I want it to show through.

*S
Re: Lock & Lock AVAILABLE
Board: Tools of the Trade
Reply to: #182400 by Dixie
Feb 4, 2008 8:58am
Thread
Quote I have never seen an 11 oz

Talk to your rep... they definitely exist. I bought a few over the weekend. It looks like the part # is HPL806.

dave
Baggies vs Boxes
Board: Tools of the Trade
Feb 4, 2008 3:39pm
Thread
Hello, helpful community!
One more in my series of fact-finding questions!
What do you think is better, if you are on a budget: Using a ziplock bag as a "box", or using a small cheap plastic food container (I am thinking like the thin disposable kind, like Glad). Assume both would be camo-painted. Thanks for your thoughts!
McBoxer
Re: Baggies vs Boxes
Board: Tools of the Trade
Reply to: #183282 by McBoxer
Feb 4, 2008 3:45pm
Thread
We use a lot of gladware. They have a small flat round one that is just the right size. They seal good, but aren't very strong. You can't pile rocks on top of them like you can a L&L. We use baggies INSIDE the container.