Skip to Content
Register · Login
About Theme

A Letterboxing Community

Search Edit Search

Read Board: Stamp Carving and Mounting

Re: Turkey Carving?
Board: Stamp Carving and Mounting
Reply to: #968601 by Oberon_Kenobi
Nov 22, 2018 9:34am
Thread
I've got a turkey planted in Turkey, Texas.
Re: Turkey Carving?
Board: Stamp Carving and Mounting
Reply to: #968601 by Oberon_Kenobi
Nov 22, 2018 9:44am
Thread
I made one last night and planted it! We have the whole family with us today, so it was fun going out and getting to box. Happy Thanksgiving, everyone!!!
Re: Turkey Carving?
Board: Stamp Carving and Mounting
Reply to: #968605 by dancingpecan
Nov 22, 2018 9:46am
Thread
We have a huge flock of wild turkeys in my neighborhood (30+)

I wonder if that count will go down after today. :D
Re: Turkey Carving?
Board: Stamp Carving and Mounting
Reply to: #968601 by Oberon_Kenobi
Nov 22, 2018 10:17am
Thread
I’m carving a micro snowman today. Trying to, anyway.
Re: Turkey Carving?
Board: Stamp Carving and Mounting
Reply to: #968608 by Wise Wanderer
Nov 22, 2018 10:25am
Thread
It almost did yesterday. There's a pretty busy street by our house and part of the flock stepped out into morning rush hour traffic!

But we do have a neighbor who's not fond of them and he's made thinly veiled threats about "Thanksgiving is coming!"
Re: Turkey Carving?
Board: Stamp Carving and Mounting
Reply to: #968612 by BinoBoxer
Nov 22, 2018 4:06pm
Thread
I’m carving a micro snowman today. Trying to, anyway.

Hope you send me a pic!!
Re: Turkey Carving?
Board: Stamp Carving and Mounting
Reply to: #968601 by Oberon_Kenobi
Nov 22, 2018 4:13pm
Thread
I've planted turkey stamps on Thanksgiving in the past but didn't this year.
Re: Turkey Carving?
Board: Stamp Carving and Mounting
Reply to: #968617 by Rocklun
Nov 22, 2018 10:43pm
Thread
Haha I think Holiday Stamps would be Hilarious!/ Fun/ Interesting!Each holiday attempt to plant a box to go along with the day!
Re: Memorial Day Carve... and mounting
Board: Stamp Carving and Mounting
Reply to: #968338 by TheKindlyVikings
Nov 24, 2018 9:23pm
Thread
Dat carves bad to the bone
Re: Memorial Day Carve... and mounting
Board: Stamp Carving and Mounting
Reply to: #968338 by TheKindlyVikings
Nov 25, 2018 9:23am
Thread
wow - great carve
Re: Turkey Carving?
Board: Stamp Carving and Mounting
Reply to: #968606 by Wronghat
Nov 26, 2018 2:25pm
Thread
What?!!! This is the first year I haven't escaped my family to go boxing. Not too terrible, though. They were here helping me get my house livable after Harvey. Who thought painting baseboard could be so relaxing? Probably the fumes.
Tan-Z Pattern
Board: Stamp Carving and Mounting
Dec 1, 2018 3:49pm
Thread
I'm carving my second stamp on Tan-Z. I noticed the texture on the back before, but I don't think that I brought it up on the forums. I'm asking here so that others can see the response, and join the discussion if they want.

Webfoot, what makes this texture? Is it just because they didn't roll it on the top, or did they roll this texture into it when it was forming?

It does make it so that only one side can be carved, unless one has a way to utilize the pattern.
Re: Tan-Z Pattern
Board: Stamp Carving and Mounting
Reply to: #968961 by Oberon_Kenobi
Dec 1, 2018 3:53pm
Thread
I don’t know the answer but we have already been through a fair amount of it. I haven’t really lost a piece due to a carving mistake but I’m sure it’s coming. I have been giving some thought to trying to sand down the back so it can be used. I don’t have any solutions yet but if I do I’ll post them.
Re: Tan-Z Pattern
Board: Stamp Carving and Mounting
Reply to: #968962 by DarkZen and Evil Cow Pie
Dec 1, 2018 4:56pm
Thread
The material is fairly thick. I wonder if you could cut away that texture on the back with an exacto or a larger gouge. People shave down, or cut off the back of stamps for micro postals, but it's not that flat. Would be hard to get a smooth surface for stamping.

maybe there's a way to secure it in a vice and cut all the way through with some kind of knife, like a guillotine?
Re: Tan-Z Pattern
Board: Stamp Carving and Mounting
Reply to: #968961 by Oberon_Kenobi
Dec 1, 2018 6:17pm
Thread
what makes this texture? Is it just because they didn't roll it on the top, or did they roll this texture into it when it was forming?

The Stampeaz webstore describes Tan-z as "smooth on one side and pebbled on the other, <the answer>due to the extrusion process used to make it</the answer>, so it's very easy to tell which side to carve."
Re: Tan-Z Pattern
Board: Stamp Carving and Mounting
Reply to: #968963 by BaliWho
Dec 1, 2018 7:07pm
Thread
I was thinking more along the lines of a belt sander. Though holding it in one spot while working on it would be a bit tricky. I have an orbital sander that might work.

The thing is, Tan is quite a bit less flexible than pink. When roughing up the carving side (so it will hold ink better) I’ve sanded a *slight* low spot. That alone can cause printing issues. Whatever method is used needs to leave the surface pretty darn flat.
Re: Tan-Z Pattern
Board: Stamp Carving and Mounting
Reply to: #968964 by Bon Echo
Dec 1, 2018 8:10pm
Thread
due to the extrusion process used to make it

Well, that answers my original question. This has generated a lot of interesting discussion though.
Re: Tan-Z Pattern
Board: Stamp Carving and Mounting
Reply to: #968967 by Oberon_Kenobi
Dec 2, 2018 6:26am
Thread
I'm just about out of all the materials I've purchased in the past and have had thoughts of ordering Tan-Z but after the original posts of the trials of the material I've seen almost none that are overwhelmingly positive. Seems like it's one problem after another.

A question for all you out there that are using this material - is it worth the effort to purchase or should I go to Michael's and buy some pink stuff?

BTW BBStacker makes lots of carving errors and almost "needs" the other side of the material.
Re: Tan-Z Pattern
Board: Stamp Carving and Mounting
Reply to: #968973 by BBStacker
Dec 2, 2018 6:46am
Thread
I have found the material to hold fine details and as much more workable than OZ and more consistent throughout the material than SLQ and current Pink stuff. Also, I like supporting fellow letterboxers and Webfoot is one of the good gals! My vote is order a slab and try it out. If it is not for you, you can hit a local store, but I am guessing once trying the stuff and getting used to it, you will like it (and perhaps mistakes will be fewer in occurrence too with familiarity of the material).

Also the more people experiment with the material, the more likely a technique to use the underside will come through.

Jeff (and his $0.02)
Re: Tan-Z Pattern
Board: Stamp Carving and Mounting
Reply to: #968974 by FORAYCH
Dec 2, 2018 7:09am
Thread
I have already carved up 2 12x12 sheets of it and find no issues with it other than cutting the stamps apart... you have to be careful as it's like it has a grain to it and if you are cutting across it - you can get hung up and then it lets go - causing the cut to go astray. But carving it is much better than pink any day of the week for me... I hate pink :)
Re: Tan-Z Pattern
Board: Stamp Carving and Mounting
Reply to: #968973 by BBStacker
Dec 2, 2018 8:12am
Thread
The Tan is much better than Pink in my opinion. I had only used pink until I tried the Tan. Wow, what a difference! After going through a couple slabs I went back and used the Pink for a donation stamp. It seemed like I was carving mud, ha ha.

I’m not sure it will help with your mistakes but it did with mine. Because it offers more resistance, the carving tools have less of a tendency “slip” into an areas that weren’t meant to be cut. I also like the way it prints much better. Because it’s less “squishy” than pink, I find I get less accidental transfer marks.

I agree that you should get a slab and try it for yourself. I also agree that it’s good to support the community.

DZ
Re: Tan-Z Pattern
Board: Stamp Carving and Mounting
Reply to: #968973 by BBStacker
Dec 2, 2018 9:20am
Thread
A question for all you out there that are using this material - is it worth the effort to purchase or should I go to Michael's and buy some pink stuff?

Tan-Z is more like OZ. I'm not a conosour so it carves the same for me. Others notice a difference.

Let me echo the idea of buying a slab and trying it.
Re: Tan-Z Pattern
Board: Stamp Carving and Mounting
Reply to: #968973 by BBStacker
Dec 2, 2018 11:52am
Thread
Tan-Z - my comments are totally overwhelming positive. I did like the old pink, sure, but am over the moon about this stuff. Yes, it's quite firm and maybe that's why I feel like I can do (for me anyway) more challenging carves, and stamps up dandy with different inks. Light pre-sanding makes a world of difference. And yes, so grateful to Webfoot.
Re: Tan-Z Pattern
Board: Stamp Carving and Mounting
Reply to: #968973 by BBStacker
Dec 2, 2018 12:58pm
Thread
...is it worth the effort to purchase or should I go to Michael's and buy some pink stuff?

Why don't you just forget both of those and buy the Japanese stuff?

http://www.stampeaz.com/index.php?main_page=product_info&cPath=1&products_id=747
Re: Tan-Z Pattern
Board: Stamp Carving and Mounting
Reply to: #968987 by Kirbert
Dec 2, 2018 1:13pm
Thread
Why don't you just forget both of those and buy the Japanese stuff?

If that’s a serious recommendation, can you tell us why (the pros and cons)?
Re: Tan-Z Pattern
Board: Stamp Carving and Mounting
Reply to: #968973 by BBStacker
Dec 2, 2018 6:54pm
Thread
There is no "One Size Fits All" perfect material, and, to be honest, all of the carving materials have their issues. You have to determine what material works best for you and your carving style. I loved Orange when it was available, but other people hated it. Conversely, I hate using OZ and some people think it's the greatest. Get the smallest piece you can, then try it. If you don't like it, then go back to pink, or try something else. Tan-Z is the new kid and everyone has something to say about it. If you go back to messages posted when OZ came out, you'll probably find everyone giving their opinion on it, and a good bit of those will be negative comments, but people learned to like it.

dp
Re: Tan-Z Pattern
Board: Stamp Carving and Mounting
Reply to: #968987 by Kirbert
Dec 3, 2018 5:18am
Thread
buy the Japanese stuff

I bought a slab of both types from Webfoot and liked one of them. The other was way too soft and I couldn't get favorable quality lettering with it. Sadly I can't remember which one was a bit more firm. But I was thinking as you are and thought I'd post the question on Tan-Z before making a decision.
Re: Tan-Z Pattern
Board: Stamp Carving and Mounting
Reply to: #968986 by Team Awesome Pants
Dec 3, 2018 5:20am
Thread
Thanks for all the replies everyone. Seeing such positive comments convinces me that I should give this new material a shot.
Re: Tan-Z Pattern
Board: Stamp Carving and Mounting
Reply to: #968988 by DarkZen and Evil Cow Pie
Dec 3, 2018 10:56am
Thread
If that’s a serious recommendation, can you tell us why (the pros and cons)?

I only tried an early prototype of the tan stuff, but I didn't care for it at all. I prefer pink. But the Japanese stuff is some of the best carving material I've ever carved. It is soft -- even the "harder" version is still softer than most materials we're familiar with -- but the softness just makes it stamp really well! It carves like a dream. The problem used to be getting ahold of it without paying exorbitant shipping rates from Japan, but Webfoot now carries it solving that problem. Admittedly it's not cheap, but it'll be the only stuff I buy as long as it's available.
Re: Tan-Z Pattern
Board: Stamp Carving and Mounting
Reply to: #969011 by Kirbert
Dec 3, 2018 11:43am
Thread
I agree - I'm a complete convert from SLQ to the Japanese SEED (thanks, Rebiccola!).