Skip to Content
Register · Login
About Theme

A Letterboxing Community

Search Edit Search

Read Board: Stamp Carving and Mounting

Re: How many stamps at once?
Board: Stamp Carving and Mounting
Reply to: #596737 by bluebirdlover
Apr 3, 2011 1:24pm
Thread
I only carve one at a time, also spending a great deal of time choosing and manipulating an image. I have Photoshop. But there are some great, free, online tools that will to the same thing.

I almost never finish in one sitting. It can take me months to complete an image, but if I take actual carving time into account, my stamps usually take between 15 and 40 hours to complete.

I also no longer consider myself a 'knife' or 'gouge' carver. I use whatever tool is better for what I'm trying to carve.

It's super interesting to me to learn how different all of our techniques are!

~RW
Re: How many stamps at once?
Board: Stamp Carving and Mounting
Reply to: #596899 by RavenWolf
Apr 3, 2011 1:50pm
Thread
It's super interesting to me to learn how different all of our techniques are!

Yes! I had an idea a while ago, that it would be fun if a bunch of us took short videos of ourselves carving. I haven't quite figured out how to do it myself yet, as the magnifying light is in the way. But I would so love to watch y'all carve.
Re: How many stamps at once?
Board: Stamp Carving and Mounting
Reply to: #596876 by WalkinOrange
Apr 3, 2011 2:08pm
Thread
How does mounting stamps change the way it stamps? (I just thought it made it a little easier to stamp or kept it from breaking)
Re: How many stamps at once?
Board: Stamp Carving and Mounting
Reply to: #596862 by Kirbert
Apr 3, 2011 2:30pm
Thread
Go ahead, tell us how many words. I'm betting it wasn't just three words in size 72 font.

Over 100 incorporated into an image. It's a big map of an area.
Re: How many stamps at once?
Board: Stamp Carving and Mounting
Reply to: #596864 by Kirbert
Apr 3, 2011 2:50pm
Thread
Wally World for $1.50 each

We are not Fla. The blankets sell out here and no close-outs. This yard is a lifetime supply for me. Kirbert, you carve many more stamps than I.
carving injury :)
Board: Stamp Carving and Mounting
Apr 3, 2011 4:35pm
Thread
I had my first carving injury today :) Sliced my finger under the nail while using a #5 to clean up edges of my stamp. That's what I get for watching the birds outside instead of what I was doing. Lesson learned!
Re: How many stamps at once?
Board: Stamp Carving and Mounting
Reply to: #596906 by EmcSquared
Apr 3, 2011 4:41pm
Thread
When a stamp is not mounted, the weight of your hand is not evenly distributed across the rubber and wherever you push is likely to be darker than the rest of the image. Also, if you have a few "gorpkins" of rubber that are not carved out all the way, they are likely to stamp even though you don't want them to. If you mount a stamp with thick foam or wood, the weight of the pressure from your hand is more evenly distributed and the chance at stamping "gorpkins" is lessened. I always clean the white area as much as possible, then I mount on thick foam, stamp, and continue cleaning out the gorpkins until I'm satisfied.
Re: How many stamps at once?
Board: Stamp Carving and Mounting
Reply to: #596922 by Dizzy
Apr 3, 2011 4:49pm
Thread
{{a few "gorpkins" of rubber}]

gorpkins???
Re: How many stamps at once?
Board: Stamp Carving and Mounting
Reply to: #596925 by Baqash
Apr 3, 2011 4:52pm
Thread
gorpkins???

Made up word, sorry. My Freshman English teacher used it to describe the torn bits of paper on the side of spiral notebook paper. He insisted that all papers turned in didn't have any gorpkins, so we were expected to cut them off if we used spiral bound paper. Since then, I've always used the word to describe bits of something unwanted that you had to get rid of, just like the bits of paper. =)
Re: How many stamps at once?
Board: Stamp Carving and Mounting
Reply to: #596928 by Dizzy
Apr 3, 2011 4:56pm
Thread
I knew what you meant, just wanted to see you explain it.
Great word.
Re: carving injury :)
Board: Stamp Carving and Mounting
Reply to: #596921 by Red Bird
Apr 3, 2011 6:07pm
Thread
I have done that so many times....usually with a xacto kids having a hay day and then look up and boom.....only needed stitches once.
Re: carving injury :)
Board: Stamp Carving and Mounting
Reply to: #596921 by Red Bird
Apr 3, 2011 8:43pm
Thread
Yep -- I've done that once, too.
All the more reason why I keep Band-Aids in with my letterboxing things.
Hope if feels better soon,
Hansenclan
Re: How many stamps at once?
Board: Stamp Carving and Mounting
Reply to: #596882 by Dizzy
Apr 3, 2011 9:01pm
Thread
That means all of the snow had to be cleaned out with the smaller gouge, which took a long time.

This is where knife carving is so much faster than gouge carving. I probably could have carved that image, from transfer to stamping, in 30-40 minutes, tops.

I love my x-acto knife. :)

GJ
Re: How many stamps at once?
Board: Stamp Carving and Mounting
Reply to: #596899 by RavenWolf
Apr 3, 2011 9:03pm
Thread
I also no longer consider myself a 'knife' or 'gouge' carver. I use whatever tool is better for what I'm trying to carve.

Yep, me too. But if I was stranded on a desert island, and had to choose between the knife and the gouge, the knife would win out.

I always start out my stamps carving with the knife, and then use other tools (gouge, needle, etc.) as the carving situation requires.

GJ
Re: carving injury :)
Board: Stamp Carving and Mounting
Reply to: #596956 by HerSheI
Apr 3, 2011 9:22pm
Thread
In denial with the stitches, just find some good tape...
Re: How many stamps at once?
Board: Stamp Carving and Mounting
Reply to: #596882 by Dizzy
Apr 3, 2011 10:58pm
Thread
Unfortunately, the giant U-shaped gouge can make the cuts too deep, thereby making the "structural integrity" of your lines at risk.

OK, please explain that better. I regularly use my Speedball #5 to dig so deep that the tips of the U are barely out of the rubber -- but admittedly I'm not actually carving anything at the time, I'm just clearing out big white areas with the edges already established.
Re: How many stamps at once?
Board: Stamp Carving and Mounting
Reply to: #596905 by frykitty
Apr 3, 2011 11:02pm
Thread
I had an idea a while ago, that it would be fun if a bunch of us took short videos of ourselves carving. I haven't quite figured out how to do it myself yet, as the magnifying light is in the way.

I tried it once with my Canon PowerShot A560 which has a nifty video mode, but it wouldn't focus close enough. I could have provided a nice video of a guy hunched over a desk doing something. I still think there's gotta be a way somehow, I just dunno how to use the full capabilities of the camera.
Re: How many stamps at once?
Board: Stamp Carving and Mounting
Reply to: #596906 by EmcSquared
Apr 3, 2011 11:12pm
Thread
How does mounting stamps change the way it stamps?

Properly mounting a stamp makes all the difference! The idea is to provide a layer of soft, squishy foam behind the rubber and a rigid backing behind that. Assembled in this manner, stamping pressure applied to the rigid backing is distributed uniformly over the area of the stamp.

It's pretty easy to demonstrate the difference for yourself. Carve a stamp and stamp some images with it unmounted. Then mount it, and stamp with it again. See how the images compare. With the proper three-layer assembly, the images always end up noticeably crisper and cleaner than unmounted.

That said, there are lots of examples of "mounting" that accomplish little or even make things worse. Mounting rubber directly onto wood makes things worse, it's very difficult to get a good image. Mounting rubber onto Fun Foam doesn't help the stamp image any (Fun Foam is too rigid, there's no appreciable give when stamping), but it does help protect the stamp as well as make it easier for the stamper to grip. And, as many here like to point out, an unmounted stamp is arguably easier to work with "in the field", as a mounted stamp truly requires a rigid flat stamping surface to work on while the unmounted stamps may be stamped reasonably well on a knee or somebody's back or whatever.
Re: How many stamps at once?
Board: Stamp Carving and Mounting
Reply to: #596911 by figureeight
Apr 3, 2011 11:14pm
Thread
We are not Fla.

Good point! They probably ship x blankets to every Wally World, and here in FL they go unsold until they discount them heavily.
Re: How many stamps at once?
Board: Stamp Carving and Mounting
Reply to: #596932 by Baqash
Apr 3, 2011 11:16pm
Thread
So, do we need to see "gorpkins" added to the glossary?
Re: carving injury :)
Board: Stamp Carving and Mounting
Reply to: #596985 by Raven
Apr 4, 2011 12:14am
Thread
I tried super gluing it but I couldnt stop the bleeding. dang near lost the tip and side of my finger
Re: carving injury :)
Board: Stamp Carving and Mounting
Reply to: #596997 by HerSheI
Apr 4, 2011 4:55am
Thread
I tried super gluing it but I couldnt stop the bleeding. dang near lost the tip and side of my finger

superglue but then pull it together with tape and let it set for awhile. Then you can take the tape off and it should hold. Or even a bandaid. just something that will keep the edges together while the glue starts its job.

hmmm why do I know this?
Re: How many stamps at once?
Board: Stamp Carving and Mounting
Reply to: #596860 by Kirbert
Apr 4, 2011 5:06am
Thread
I saw an X-Acto knife on sale at Wally World the other day for $2. Didn't buy it, didn't need it. X-Acto also has another type handle available at Wally World, it's got the clamping knob way down at the butt end of the handle rather than up next to the blade.

Thanks for sharing this information. It actully made me stop and take a closer look at the handles of my knives. One of the handles in my knife set has a round end and I was able to FINALLY find a handle strong enough to hold my vet needles! Last night I had a blast learning to carve with the needles. What a difference those make!

So...thank you, thank you, thank you for taking the time to write back and helping me problem solve my carving area. I never gave the handles of the X-Acto knives a thought because I thought their ends were all the same.

Tri-Colored Paws
P.S. I tried the razor knife for the first time the other night and loved how sturdy and easy it was. Now to practice precision!
Carving tool wall cabinet
Board: Stamp Carving and Mounting
Apr 4, 2011 5:29am
Yesterday, while Googling tool handles, ideas started forming in my head. Has anyone tried to make a wall cabinet for their carving tools? I would like to make one so my knives are safely stashed away but easily accessible. Right now, I've got numerous kits sitting here and there. Time to organize and keep sharp tools away from visiting children.

Sorry about your finger, "Red Bird".
Tri-Colored Paws
Re: How many stamps at once?
Board: Stamp Carving and Mounting
Reply to: #596925 by Baqash
Apr 4, 2011 5:31am
Thread
http://www.urbandictionary.com/define.php?term=gorpkins
The base word is "gorp" - good ole raisins and peanuts. Just a reminder I taught Physical Education not English.
Re: How many stamps at once?
Board: Stamp Carving and Mounting
Reply to: #596992 by Kirbert
Apr 4, 2011 6:48am
Thread
OK, please explain that better. I regularly use my Speedball #5 to dig so deep that the tips of the U are barely out of the rubber -- but admittedly I'm not actually carving anything at the time, I'm just clearing out big white areas with the edges already established.

When I scoop out the big white areas, the white parts are shallower and when you press down on the stamp, there's less thickness to keep the weight of your pressure evenly distributed. It seems like the problem is that when I make the first pass, it cuts fine. I make another pass close to it and that is fine. But there often ends up being a raised area between the 2 passes that is not fine, so I then take the gouge and scoop that out, too. Now the rubber is much thinner there and the weight is already not going to be even, but then I stamp the image and now I've got areas between the three cuts that are stamping when they shouldn't, so now I have to cut more. Seems like a never ending problem.

What I've started doing is using the larger gouge when I can and just barely taking any swipes at it. It ends up being maybe just twice as big cuts as if I'd used the smaller one. Then I stamp and when I find the raised areas that are stamping and shouldn't, I still need to take the smaller gouge to clean up the gorpkins. No matter if I use the big gouge or not, I'm always using the small gouge for the main cleanup.

Seems like when I carve, the only time it would save time to use the big gouge is when there are huge amounts of white area, and when that happens, you already have a hard enough time keeping the white area from stamping inadvertently. If I mounted on wood, it would be less of a problem, but I mount on foam so I have to be more careful about cleanup in the white area. Too shallow makes ink gorpkins on the image. Too deep still makes ink gorpkins on the image.
Re: How many stamps at once?
Board: Stamp Carving and Mounting
Reply to: #597004 by Tri-Colored Paws
Apr 4, 2011 6:49am
Thread
For some reason I thought the Razor knife and the Xaxto knife were the same thing. Where would I find a Razor knife? Or does that need to be made up special?
Re: How many stamps at once?
Board: Stamp Carving and Mounting
Reply to: #597010 by figureeight
Apr 4, 2011 6:53am
Thread
My guess is that one of Mr. Dale's former students added that to urban dictionary. Back when I was a freshman, the world wide web wasn't even a glimmer in our eyes and the only dictionary was the big "bug squasher" that was kept on a shelf.
Re: How many stamps at once?
Board: Stamp Carving and Mounting
Reply to: #597029 by Okie Dog
Apr 4, 2011 7:37am
Thread
Where would I find a Razor knife? Or does that need to be made up special?

I had to Google it to see exactly what a razor knife was myself. I also thought they were the same as the X-acto until I started looking around. What I happen to grab the other night, my daughter calls a "box cutter". It does have the razor and it is a knife. I still could be using the term wrong but that's what I used and I LOVED it.

Now to sit back and see what others call a razor knife. That will be interesting. Google came up with a lot of knives.
Re: How many stamps at once?
Board: Stamp Carving and Mounting
Reply to: #597049 by Tri-Colored Paws
Apr 4, 2011 7:56am
Thread
tcp that is what I would call a razor knife too