Read Thread: OZ Cut
Re: OZ Cut
Board: Tools of the Trade
Reply to: #734556 by frykitty
Oct 1, 2012 12:02am
Completely different animal, IMHO. To me, PZ Kut white was very similar to pink stuff only stiffer. PZ Kut orange was completely different, almost as though you were cutting wax instead of rubber. It was incredibly firm -- in fact, arguably too firm for images with broad expanses of solid black -- yet a knife slid through it with the greatest of ease as though it had a built-in lubricant. You could cut the tiniest detail and still get a smooth cut, as opposed to the way pink stuff sometimes gets ragged around tiny cuts. The orange color was a key feature, as whenever you sliced it with a knife the area would glow much brighter orange, clearly indicating where you have cut and where you haven't cut yet. I've since noticed that pink stuff does this too, just to a much less noticeable extent.
Re: OZ Cut
Board: Tools of the Trade
Reply to: #734603 by Kirbert
Oct 1, 2012 4:20am
Thank you for mentioning this. Now that I have new glasses, I'm really starting to notice the ragged edges and they are driving me crazy!
I have had access to only pink stuff for a long, long time. Thanks to a few folks here on AQ, I've been able to sample the firmer types of white and I am noticing some of the exact same differences that have been mentioned here with the tools. Good to know it's not just me. :)
As soon as I can get images to transfer to the other three pieces, I will have a nice set of samples to keep as PT's. All the images were made from the same type of design using the same tools, sharped before each carve. It's been a really fun experiment. Anyone have a list of all the mediums so I can double check to see what else I need to add to the group?
Re: OZ Cut
Board: Tools of the Trade
Reply to: #734228 by Piper on the Trail
Oct 1, 2012 7:21am
I hated it for knife carving, but I adapted fairly well when I went back to gouging, where it's easier to get crisp lines and fine details. It resists well enough that I don't usually accidentally cut back into my already-cut lines, a pet peeve of mine and a constant problem for me. It works me way harder than either the pink stuff or PZ. I'll probably get more, but would really like to go back to my knife. Maybe the orange stuff. . .
Re: OZ Cut
Board: Tools of the Trade
Reply to: #734375 by Bumble
Oct 1, 2012 9:41am
I printed a detailed picture on my inkjet & immediately rubbed it onto the pink stuff (I think) & it transferred perfectly. A lot better imprinting than tracing which I had been doing.
Re: OZ Cut
Board: Tools of the Trade
Reply to: #734702 by Topcollector
Oct 1, 2012 9:44am
Agree, as carve can only be as good as the transfer.
Re: OZ Cut
Board: Tools of the Trade
Reply to: #734603 by Kirbert
Oct 1, 2012 9:50am
Knife carver porn.
Oh, my.
GJ
Re: OZ Cut
Board: Tools of the Trade
Reply to: #734705 by GreenJello
Oct 1, 2012 10:40am
That's exactly the thought that crossed my mind when I read his post... Jeez, Kirbert, would you like us all to leave you alone with that slab of orange?
Re: OZ Cut
Board: Tools of the Trade
Reply to: #734722 by Bumble
Oct 1, 2012 3:17pm
You can say or think what you will about me if you want -- if you'll send me a slab of orange! I've been out for a coupla years now.